Call us at 725-239-9966!
M-F: 8 AM-7 PM PST
Call us at 725-239-9966!
M-F: 8 AM-7 PM PST
No special expertise is required to setup the Modeno & Elementi Plus Fire Pits. However, since the fire pits are very heavy, we advise you to have one or more people help you set them up.
It’s very easy! Ten minutes would be enough. Please refer to the Guide Book.
Fiber concrete and eco-stone are used to manufacture our fire pits. These materials are particularly robust and ensure durability. Fiber concrete is concrete whose properties are optimized by adding fibers, for example to prevent the formation of cracks. Eco-Stone is made from natural inorganic mineral powder with the addition of high-quality plastics. Attractive appearance, high stability and low weight are the characteristics of this material. For product properties of the various fire pits, please refer to the information on the respective item.
The gas bottle cannot be integrated into all fire pits. In the case of fire pits, where possible, this is explicitly stated in the product description.
Both the pressure reducer and the hose needed to connect to a gas cylinder are included.
The item does not require an electrical connection. It is a push button ignition that is battery powered.
Yes, the propane tank connection is a standard connection. Inlet connection: QCC (1.312”-5ACME)
Yes, this item is made to be used outdoors. However, it should be covered during the winter months. And be sure to keep the bottom of the stove ventilated when in use.
Yes, it can stay outside over winter but should be covered with a weather hood.
The rain does not damage the fire pit much as it is designed for outdoor use. However, we recommend using either a protective hood or a cover for general protection.
It's not a problem, the fire pit can be placed on a wooden base.
The overhead clearance requirement is 72" above the height of the table top. The umbrella would need to be 6' taller than the table.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
Leave a comment